Passenger travelling outside the carriage


In the red line, one triangle passenger is travelling outside the carriage. Log attached.

output_log.txt (77.4 KB)


This is very common above 150 passagers / tick.


That poor passenger just wasn’t going to wait any longer!

Thanks for the screenshot. We’re still searching for what the problem is on this one, so any info is good info. Have either of you ever seen more than the trains capacity (ie 7+ passengers on a single train)?


No, the capacity is ok.

The available capacity is just outside the train, with a maximum of 3 on trains with a cap of 6, and 2 on a cap of 4.

#5 < example. < secondary. < purple train on the bot left.


Ahh good. It would have been extra strange if it was over capacity. Thanks for taking the time to catch and post the screenshots. We’ve got the bug on our list but it’s a wee bit down as it doesn’t effect game play, it just looks a bit funny. Cheers!


Check the yellow train on the bridge, this is the max outside the train.

Had it on several lines in this level.


output_log.txt (146.3 KB)
Current log.


Cheers, thank you! Unfortunately, the logs don’t look like they will help (there’s just too much info going through them). As long as we’re not seeing more than 6 passengers “on” the train, the problem hopefully wont’ be too tough to solve.


I have seen several times (especially with the shinkansen on Osaka) a single carriage train taking as many as 12 passengers. Will post screenshot when it next happens


Now you mention this, yes with shinkansen it happens a lot. The thing is, I only choose Shinkansen when I am forced too.


Really I try to get a dedicated high speed line asap


What your highscore in Osaka atm? I have 3000+ as recond, dont know on which device though, on Steam I have 2400 soemthing. Upped steam, it stays a horrible level.


Yeah, we plan to play a lot of Osaka games when we start digging into the bug.


Is this related to the passenger outside problem? There is something wrong with the station queue display… in the interchange triangle station near the middle of the screenshot. Eariler, I saw the ‘passenger traveling outside the carriage’ problem on the orange line in this image.


Wow, never seen that before at stations. Which version are you running on Android @TransitTourist?


According to Google Play, MM 1.7.0 Sep 1, 2017.


Maybe some people went to the loo?


We’re there more passengers than shown or were the icons simply a bit scattered?


Definitely more passengers than shown … I believe, when a station is “overloaded” the last line of passengers fades out, then as passengers depart, the queue updates, but sometimes gaps start to appear in the display. I’ve seen three blank rows of passengers.

This problem comes up often for me on Osaka, and might be a useful test case, though I haven’t noticed passengers travelling outside in Osaka.

I set up Osaka with a minimal plan – a three station tight triangle/dot/square loop with a couple of lines connecting all the uniques to the square. And I make the triangle an interchange as soon as possible, and feed it using relief lines just with the fast trains. Sometimes 3 full trains arrive at the same time, along with a locomotive to shuttle square passengers out of the triangle. I’ve noticed with this method, that the station takes a long time to get a count down timer, maybe because so many passengers are coming and going at once, or maybe because a counter is screwed up???

Regardless my efforts… I haven’t been able to get past my top score for quite some time :(((

some screenshots … the square station w/countdown timer… with mixed up queue

the square station again, after three trains dispatched… still mixed up queue